亚洲熟妇一区二区三区在线观看,久久88,国产午夜福利在线观看视频,国产V亚洲V天堂无码久久久

Medical

Water Electret Meltblown meet ASTM Level 2 & Level 3 Standard

Water-Electret-Meltblown-LEVEL2&LEVEL3-Cbt02.jpg

Cobetter Water Electret Meltblown, compared with traditional electrostatic electret meltblown, has higher filtration efficiency and lower resistance, which can meet the ASTM American mask standard《ASTMF2100-2019》Level 2 and Level 3.

 

The core of PPE protective facial mask is meltblown. The traditional corona thermal electret electrostatic meltblown material is made of polypropylene, adding corona when it is heated, thus formed not a permanent electrostatic electret, with little electricity charged and uneven distribution. When producing into masks, it needs stacking more polypropylene filaments to reach the qualified filtration efficiency, thus the breathing resistance will be high. Therefore, for ASTM Level 2 & Level 3 barrier masks that require extremely high filtration efficiency and low respiratory resistance, it is difficult for traditional electrostatic electret meltblown to meet both requirements at the same time. If the filtration efficiency is high, the corresponding resistance will exceed standard. 

Hydro Charging Meltblown Manufacturing Processes

water-electret-meltblown-SEM-cbt.jpg

Cobetter water electret meltblown, passing through a water electret equipment, firstly undergoes a cold water cooling, the pure water passes through a certain angle, pressure, and flow rate to spray the meltblown. The friction between the water and the meltblown cloth generates static electricity, which is transported through conductive material in the electret masterbatch and enters into tourmaline or zircon to achieve static retention. The advantage of water electret lies in its electrification process, which is carried out in a high humidity environment. The static electricity on the surface of the meltblown cloth is washed away by the water, leaving the static electricity only inside the meltblown.


The second process of water electret is a process of drying and electricity locking for meltblown. The drying process uses the flow of hot air, the surface temperature is increased and the surface air flow is increased to dry. This process is actually a working principle of a static elimination equipment. All of the electricity staying outside of the electret masterbatch, will be taken away. In this second process, a part of the electricity on the surface of the meltblown cloth is eliminated, that is, virtual electricity. Therefore, after the above two processes, the electret on the polypropylene can be guaranteed to be last long.


Excellent Cobetter Water Electret Melblown

Compared with the traditional corona thermal electret electrostatic meltblown material, water electret meltblown is more saturated with static electricity, and its electrostatic retention is more than three times that of the electric electret, so the corresponding filtration efficiency is higher. Because the electric field is high, there are few materials to be stacked, thus the amount of polypropylene stacked is only half of the electric electret. The material required is thinner, and the breathing resistance is correspondingly lower. Cobetter water electret meltblown is perfect for ASTM Level 2 & Level 3 Surgical face mask usage.

Production Base  

Cobetter meltblown adopts Japanese original production line, guarantees that all production and packaging are completed in a 100,000-class clean room to ensure high cleanliness.

water-electret-meltblown-productline-cbt.jpg

Cobetter experiments have verified that, target for American standard《ASTMF2100-2019》 LEVEL 2, LEVEL 3 masks, Cobetter water electret meltblown can achieve the requirement of 98% filtration efficiency under the premise that the resistance is not exceeded.




Features and Advantages

  • ·  Saturated amount of static electricity

  • ·   High particle filtration efficiency

  • ·   Few Polypropylene stacking volume

  • ·   Low resistance



LEVEL2 & LEVEL3 Standard


BFE

Differential Pressure (pa)

PFE  (%)

   Level 2

98 %

50

   98

   Level 3

98 %

60

   98

Remarks:《ASTMF2100-2019》requires, the bacteria filtration efficiency of Level 2 and Level 3 masks achieve 98% or higher, differential pressures are less than 50pa and 60pa respectively, and filtration efficiency for 0.1μm latex particles is higher than 98%.

Water Electret Meltblown Test Report


Weight (g/m2)

Differential Pressure (pa)

PFE  (%)

   Melt-Blown

30

< 30

 > 98

Cobetter experiments have verified that, target for American standard《ASTMF2100-2019》 Level 2, Level 3 face masks, Cobetter water electret meltblown can achieve the requirement of 98% filtration efficiency under the premise that the resistance is not exceeded. 


Links:

Cobetter water electret meltblown-meet FFP2 & FFP3 standards

Cobetter PTFE mask membrane-meet EU mask standards《EN14683:2019+AC》TYPE ⅡR level


ASTMF2100-2019 Standard.pdf

ASTMF2100-2019 Standard.jpg

              



 


For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message






免费播放成人av| 就是色在线综合| 女同| 久久青青99| 国产精品社区久久久久| 中文字幕熟女av一区二区| 久久六月激情中文| 国产123| 日韩丝袜美腿在线| 日韩亚洲天| 国产片黄| 91熟女最新| 人妻三级片| 亚洲交换无码精品A1| 亚洲成a人v欧美综合天堂麻豆| 内射少妇小视频| 精品av| 男人j插进女人P视频| 国产区精品| 中文国产免费| 淫视频网在线播放| 人妻欧美| 五月婷婷丁香综合啪啪| 久久综合丝袜日本网| 国产一线视频| 国产91丝袜在线| 久久久99品牌的特色产品| 无码窝AV性导航| www.av在线| 亚洲杏色无码av| 桃色无码无毛视频| 色呦呦手机在线观看| 日本黄色精品高清| 久久久精品日本| 国产美女精品三区四区| 浪潮AV激情高潮国产精品| 日本久久耐| 久久青青草原| 无码人妻精品电影| 偷偷日| 国产观看在线精品播放|