H-CSD Lenticular Housing Series specially designed for use with CSD lenticular filter modules.
Designed according to sanitary requirements,the well-polished housing leaves no residual liquids and has an easy throughput for cleaning.
The bottom in/bottom out flow pattern eliminates turbulent flow; thus, enhancing filtration efficiency.
Maximum height stack of 4 meets high flow rates requirements.
| Polish Type | Mechanical Polish or Electro-Polish |
| Finish | Internal Ra: 0.3μm or External Ra: 0.4μm |
| Design Pressure | 0.6Mpa (6bar) |
| Max Temp. | 130 °C (266°F) |
| Sterilization | Inline / Autoclave @ 121°C |
| Housing Body | 304 or 316L |
| Vent / Drain | 304 or 316L |
| Swing Bolt | 304 |
| Feet Support | 304 |
| Sealing | Silicon, Viton, EPDM, PFA |
| Housing Connection | Swing Bolt |
| Inlet / Outlet | Tri-clamp |
| Vent | 1.2”NPT |
| Drain | Tri-clamp 0.5 S |
| Pressure Gauge | 1.5S Tri-clamp |
| 12” 16Lenses | 12” 32Lenses | 12” 48Lenses | 12” 64Lenses | ||
| A | Total Height | 800 | 1070 | 1340 | 1610 |
| B | Inlet to Body Center | 200 | 200 | 200 | 200 |
| C | Diameter | 350 | 350 | 350 | 350 |
| D | Inlet to Ground | 150 | 150 | 150 | 150 |
| E | Outlet to Ground | 245 | 245 | 245 | 245 |
COPYRIGHT 2014 Hangzhou Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
